This project is simple enough for 3
year olds, yet can work for children up to pre-teen years.
Materials needed:
Step 1: Measure and draw the 7
different pieces on the 1 x 8" pine board. Follow measurements on drawing
below.
|
|
Step 2: Cut out pieces Step 3: Measure for holes in front and back panel. Drill 1" hole in top of both panels. Drill 3/8" hole as marked for perch in front. Diamond shaped front door has 4 sides that are 1 1/2" each. Measurement for center point for all these holes is shown on drawing to right. For diamond shaped front door, draw pattern then drill 1/4" holes in each corner. Cut between holes to create opening. Step4: Assemble...glue in perch...install small eye hook at top of roof, one inch in from each end for cord or chain hanger. Step 5: Sand smooth and paint as desired. |
No comments:
Post a Comment