A Craftsman beauty that is at home wherever you place it. While it was designed as a nightstand to grace a bedroom, there is no reason you could not put this winning Craftsman style table anywhere in your home. Imagine, for instance, how perfectly it would serve as a lamp table beside your reading chair. We made the wide panels of the nightstand by gluing up narrow stock. For best results, select straight, flat boards, and joint the edges. Take care to match the grain as well as you can when laying out stock to glue up.
Finished Dimensions
Height: 28 inches (71.1 cm)
Width: 22 inches (55.9 cm)
Depth: 18 inches (45.7 cm)
Plan Author: James R. Downing
Plan Contributors: Marlen Kemmet, Larry Johnston, Kim Downing, Lorna Johnson, Jamie Downing
Plan Format: PDF
Plan Size: 0.8MB, 16 pages
Published Date: 1998
Plan Language: English, all measurements are inches/feet unless stated otherwise.
Wood and Supplies needed:
1 of 1/4 x 12 x 24 inch oak veneer plywood
1 of 1/2 x 3-1/2 x 72 inch oak hardwood
2 of 3/4 x 7-1/4 x 96 inch oak hardwood
2 of 3/4 x 9-1/4 x 72 inch oak hardwood
Tools needed:
Table saw, jointer, lots of clamps and other common workshop tools.
About this downloadable woodworking plan: From the Editors of WOOD Magazine. This is a project plan that you will download immediately after your purchase. PDF plans cheaper than the paper plans in this series plus you save the shipping cost and wait time! This PDF has full color pages with scaled and full pattern templates that you can print onto 8-1/2 x 11 inch paper. It will be just like you are reading the magazine article itself! All building instructions and finishing guides provided.
No comments:
Post a Comment