This is a Union tool chest with the original carry box. This tool chest
is assembled from quarter-sawn white oak (you can use other material)
with finger joints. Each of the drawers runs on wooden rails, which fit
flush in the case. The front of each drawer has a small detail, which
today, as then, is made with a scratch tool. We detail the tool in the
instructions. The drawers are staggered in size from the top to the
bottom and when finished they are lined with green felt. There is a
locking front door to the chest that stores under the bottom drawer when
not in use. The carry box is made of white pine and the
construction is
quite simple. It also has a locking door. When you complete this
project you will own an exact reproduction of a tool chest that set the
standard for excellence for many craftsmen at the turn of the century.
Carry Box is 16 inches high x 29.25 inches wide x 12.5 inches deep.
Finished Dimensions:Height: 14 inches (35.6 cm)
Width: 26 inches (66 cm)
Depth: 10 inches (25.4 cm)
Plan Contributors: K. Krueger
Plan Format: Paper
Published Date: 1998
Plan Language: English, all measurements are inches/feet unless stated otherwise.
This plan contains all of the information to build this beautiful piece of furniture for your home. Includes:
- 8-1/2 x 11 inch multi page, detailed instruction booklet
- Plan printed on 36 x 48 inch paper
- Many of the pieces are shown full size
- Bill of Materials and Cutting List
- Plans for jigs and fixtures when necessary
- Finishing techniques
No comments:
Post a Comment